Flаѕh Dеаlѕ - 60% оƒƒ IRWIN Step Drill Bit, 3/16-Inch to 7/8-Inch, 3/8-Inch Shank (10234) Reviews
So you can check out the other reviews at Amazon.com
only with $ 43.52
| Material | High Speed Steel |
| Finish Type | Black Oxide |
| Shank Type | Round with Flats |
| Brand | Irwin Tools |
| Item Dimensions LxWxH | 0.1 x 3 x 6 inches |
- This product is easy to use.
- This product is highly durable
- This product is manufactured in United States.
- Save time because you don't need to change drills for different-sized round holes in thin materials. Each drill acts as a pilot for the next size.
- Made from industrial-grade high-speed molybdenum steel heat treated for maximum durability. SpeedPoint tip penetrates faster and prevents walking.
- Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.
- Non-skid tip, no need for center punches. 3-faltted hex shank prevents drill chuck slipping. Drill diameters etched in flute for easy identification.
- Backed by a full lifetime warranty.
From the manufacturer
For over a century, innovation has been the hallmark of IRWIN TOOLS. Beginning in 1885, with the development of the first IRWIN Auger Bit, and progressing with the introduction of Vise-Grip Locking Tools, SPEEDBOR Flat Bits, MARATHON Saw Blades, QUICK-GRIP Bar Clamps, and UNIBIT Step Drill Bits, IRWIN has been at the forefront of the industry, creating superior tools for the professional tradesman.
IRWIN UNIBIT Step Drill Bit #4, 3/16"-7/8" (12 Steps)
Multiple Hole Sizes, 1 Bit
The IRWIN UNIBIT Step Drill Bit gives you maximum drill control to make up to 12 hole sizes with the same bit in 1/16” steps, from 3/16" to 7/8", while the single flute design creates precise, clean holes.
- SpeedPoint tip for fast starts
- Single fluting cutting edge drills clean, true holes
- Durable, high-speed steel
Engineered for Speed and Control
IRWIN UNIBIT step drill bits are precision-crafted with a single-flute cutting edge to deliver clean, accurate holes without burrs every time to get the job done right.
 |
 |
 |
|---|---|---|
Laser-Etched SizesSizes are laser etched into the metal so that they will not wear off even after repeated use. | Clean, Precise DrillingThe SpeedPoint tip is guaranteed to start fast while the single flute design delivers holes that are drilled cleanly and precisely in a variety of materials including mild steel, plexiglass, laminate, and more. | Step Drills for Every ApplicationFor every trade, application, and material, IRWIN provides the long-lasting accuracy and durability you need. |
Product Description
Product Description
Irwin 10234 Unibit #4 12-Step High Speed Steel 3/8-inch Step Drill Bit, 1/16-inch Steps (3/16- to 7/8-inch) Save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size. Made from industrial-grade high-speed molybdenum steel heat treated for maximum durability. Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. SpeedPoint tip penetrates faster than previous Unibits and prevents walking. Non-skid tip does away with the need for center punches; 3-faltted hex shank prevents slipping in drill chuck. Drill diameters etched in flute for easy identification..
Amazon.com
The Irwin 10234 UniBit #4 12-Step High Speed Steel Fractional Self-Starting Step Drill has a single-flute cutting edge to give you more control and produce true, round holes. Twelve holes range from 3/16 to 7/8 inches, in 1/16-inch increments. A non-skid tip does away with the need for center punches, while the three flatted shanks prevent slipping in the drill chuck. This drill is made from industrial-grade high-speed molybdenum steel heat treated for maximum durability, and it is ideal for work on thinner materials. The multiple steps mean you don't have to have a toolbox with specific size drill bits, and this drill is backed by a full lifetime warranty.
Product Specifications
Clісk Hеrе : ☞☞
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut IRWIN Step Drill Bit, 3/16-Inch to 7/8-Inch, 3/8-Inch Shank (10234)Thе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 80% fоr реорlе whо buу IRWIN Step Drill Bit, 3/16-Inch to 7/8-Inch, 3/8-Inch Shank (10234) рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------